Stryker SwitchPoint Infinity 3 - Call Groups

45
FFiigguurree 2255.. LLaasstt 1100 DDiiaalleedd CCaallllss SSccrreeeenn
Any endpoint or remote site displayed on the Last 10 Dialed screen can be dialed with
one-touch dialing by pressing the entry. The SwitchPoint Infinity 3 Control System will
automatically attempt to connect to the destination. If the call is successful, you will be
taken to the Active Call screen.
10.8 Call Groups
The Call Groups tab provides call-specific presets for call types available from the
SwitchPoint Infinity 3 Control Interface. Once a Preset is stored in the Call Groups
section, the call can be placed using one-touch dialing from the Call Groups tab.
FFiigguurree 2266.. CCaallll GGrroouuppss SSccrreeeenn