37
10
Calls
The SwitchPoint Infinity 3 Control System allows room-to-room connectivity for video
conferencing. All connections within the Operating Room Information Systems (ORIS)
are transmitted using broadcast quality audio and video. Offsite connections are
accomplished via the use of a Codec Device.
The SwitchPoint Infinity 3 Control System equipped with ConnectSuite allows room-to-
room connectivity for IP video conferencing using Stryker SuiteLink and a Campus
Codec. In addition, IP broadcasting to the desktop is supported using Stryker SuiteView.
The SwitchPoint Infinity 3 Control System with a Video Network Hub supports manual
dialing of Room-to-Room, Broadcast, and View Only calls along with as IP, ISDN, and
Gateway calls using either the Stryker Video Network Hub or a locally connected Codec.
The SwitchPoint Infinity 3 Control System also can “wait” for an incoming Codec call from
any available Codec, meaning that when a call comes from a specified Codec, the call
will be automatically connected, whereas all other calls will need to be accepted before a
connection is complete.
NNoottee:: IIff yyoouurr ssyysstteemm iiss nnoott eeqquuiippppeedd wwiitthh aa SSuuiitteeLLiinnkk,, VViiddeeoo NNeettwwoorrkk HHuubb,, oorr
llooccaallllyy ccoonnnneecctteedd CCooddeecc,, tthhee CCaallllss mmeennuu aanndd PPrriivvaattee bbuuttttoonnss wwiillll bbee ggrraayyeedd oouutt
aanndd nnoott aacccceessssiibbllee..
In addition to manual dialing, the Calls feature supports one-touch calling of any
connected endpoint from the Campus Status tab, one-touch dialing of the Last 10 Dialed,
and up to 200 presets in the Call Groups tab.
Calls can be made from the Manual Dial, Campus Status, Last 10 Dialed, or Call Groups
interfaces. To access the interface, press the CCaallllss button on the Global Taskbar.
To Next Page
Loading...