Summa S2 CLASS - 1 Setup; 1.1 Overview; 1.2 Manual organization

TOC 1-1
1 Setup
INTRODUCTION
1.1 Overview
This is the Summa Service Manual for the S Class series cutters. It provides information for
servicing the cutters. All repairs are to be made by, or under the direction of, authorised
Summa service personnel.
There will be only one version of this manual. All changes will be send out as appendices or
service aids.
This manual is copyrighted by Summa 2005. Summa reserves the right to change any
information contained in this manual without prior notice. Unauthorised copying,
modification, distribution, or display is prohibited. All rights reserved.
1.2 Manual organization
This manual is divided into the following sections:
• Table of Contents
• Introduction
• Replacement guidelines
• Calibrations
• Error messages
• Menu structure
• Maintenance and cleaning
• Figures - part numbers
• List recommended spare parts
• List of consumables