Contents vii
▼ To Connect a Terminal to the Serial Port 91
▼ To Set Up the Terminal Emulation Program 92
▼ To Establish a Connection With the Serial Port 92
▼ To Configure the IP Addresses 94
A. Configuring iSCSI on the Sun StorageTek 2510 Array 97
Configuring iSCSI Overview 97
iSCSI Concepts 98
Configuring iSCSI - Detailed 99
Preparing for iSCSI and Installing Hardware 99
Configuring iSCSI Tasks 100
Identifying the Target Port IP Address 101
Adding Initiator Information 103
Configuring Other iSCSI Features 104
Additional iSCSI Topics in the Online Help 104
Configuring Mutual Authentication for an iSCSI Session 105
▼ To Configure Mutual Authentication 105
B. iSCSI Configuration Example
Using Solaris 107
▼ To Prepare for the iSCSI Configuration 107
▼ To Configure iSCSI 108
C. iSCSI Configuration Example
Using Windows 111
▼ To Prepare for the iSCSI Configuration 111
▼ To Configure iSCSI on Windows 112
D. Connecting to the 2510 Array with Other Topologies 121
Connecting to the 2510 Array with Other Topologies 121
Host Cabling Configurations – Single Controller 122
To Next Page
Loading...
