C-14 SPARCengine Ultra AX
i
OEM Technical Manual • May 1999
11. Install the CD ROM drive
a. Set the SCSI ID select as applicable. (Solaris default is 6.) Refer to the CD
ROM drive label and the manufacturers documentation for additional jumper
information.
FIGURE C-12 Ultra AXi CD ROM Drive Installation
Note – A block size of 512 bytes is selected when the jumper is placed as shown.
A 512 byte block size is required by Solaris.
ID
Block Size
Plextor 12/20X
Jumper Panel
Two screws
Two screws
To Next Page
Loading...