Sun Microsystems SPARCengine Ultra AXi - Sequence of Events at Power Up; Configuration

4-1
CHAPTER
4
Sequence of Events at Power Up
This chapter details the sequence of events that occur at Power Up in the reference
configuration described in Appendix C. Interaction with OBP and Solaris is referred
to where applicable. This sequence does not address all possible configurations.
4.1 Configuration
A minimum configuration for the Ultra AXi motherboard is:
■ Ultra AXi motherboard with OBP3.10.8 or later
■ 32MB Memory
■ UltraSPARC IIi CPU Module
■ Console terminal connected to TTYA
■ Boot Device - network
The reference configuration for this manual is:
■ Ultra AXi motherboard with OBP3.10.8
■ 128MB Memory
■ UltraSPARC IIi CPU @270MHz
■ ATI graphic card in a PCI slot connected to monitor
■ Sun Type 5 keyboard
■ Boot Device - Disk
■ OBP environment:
■ Boot-device = hard disk
■ Diag-switch? = false
■ Diag-Level = min
■ Auto-boot? = false