Contents xiii
B.3 Back Panel Connections B-6
B.4 Thermal Map B-7
B.5 UltraSPARC IIi CPU Module Mechanical Drawings B-9
C. Assembly, Installation and Initial Start Up Procedures C-1
C.1 Before You Start C-1
C.1.1 Materials Required C-2
C.1.2 Power Budgeting C-3
C.1.3 Software Installation Information C-4
C.1.4 Tools Required C-5
C.2 Typical Assembly C-5
C.2.1 DIMM Configuration Considerations C-16
C.3 Initial Power-On and Firmware Update C-26
C.4 Software Installation C-27
C.5 System Aging Test C-28
D. OpenBoot Firmware D-1
D.1 Minimum Requirements D-2
D.2 Additional OBP Features in Ultra AXi D-2
D.2.1 Additional Commands D-3
D.2.2 Additional Environment Variables D-3
D.3 Flash Memory and NVRAM Layout D-4
D.4 Power on Self-Test (POST) D-5
D.5 OpenBoot Diagnostics (OB Diag) D-6
D.6 Entering the OBP Environment D-7
D.7 Selected OBP Commands D-8
D.8 Configuration Variables D-9
D.9 Device Tree D-11
D.10 PCI Probe Lists D-12
D.11 Device Aliases D-13
D.12 OBP Video Drivers D-14
To Next Page
Loading...
Need help?
General