D-10 SPARCengine Ultra AX
i
OEM Technical Manual • May 1999
boot-file empty string File to boot (an empty string lets secondary booter choose
default).
boot-device disk net Device from which to boot.
local-mac-address? false
ansi-terminal? true
screen-#columns 80
screen-#rows 34
silent-mode? false
use-nvramrc? false If true, execute commands in NVRAMRC during system start-
up
nvramrc empty string Contents of NVRAMRC.
security-mode none Firmware security level (none, command or full).
none: No password required (default).
command: All commands except for boot and go require
password.
full: All commands except for go require the password.
security-password no default Firmware security password (never displayed).
security-#badlogins 1073741824
oem-logo no default Byte array custom OEM logo (enabled by oem-logo? true).
Displayed in hex.
oem-logo? false If true, use custom OEM logo, or use Sun logo.
oem-banner empty string Custom OEM banner (enabled by oem-logo? true).
oem-banner? false If true, use custom OEM banner.
hardware-revision
last-hardware-update 00 00 00...
diag-switch? false
TABLE D-2 NVRAM Configuration Variables (Continued)
Parameter Default Description
To Next Page
Loading...
Need help?
General