Chapter 3 Servicing Customer-Replaceable Devices 3-3
FIGURE 3-1 Server Front
TABLE 3-1 shows physical drive locations for a Sun Fire X4450 server with 8 hard
drives:
3.2.2 Sun Fire X4450 SSD Guidelines
The X4450 server supports installing SSDs in the HD bays. Each SSD provides at least
32Gb of SATA capacity.
The Sun Fire X4x50 servers support solid-state drives (SSDs) under the following
conditions:
Sun Fire X4450 with on-board controller:
■ Up to 6 SSDs can be installed.
■ Hard drives are not supported.
Sun Fire X4450 with both HBA and on-board controller:
■ 0 to 4 SSDs can be installed into the system for the X4450.
The remaining slots can be filled with up with hard drives that can equal up to 4.
■ SSDs should be installed in Slots 0 to 3.
■ Hard drives should be installed in Slots 4 to 7.
TABLE 3-2 shows drive numbers for a server with 4 SSDs and 4 hard drives.
TABLE 3-1 Physical Drive Locations (Sun Fire X4450)
HD1 HD3 HD5 DVD drive
HD0 HD2 HD4 HD6 HD7
TABLE 3-2 Physical Drive Locations- SSD and HD Configuration
SSD1 SSD3 HD5 DVD drive
SSD0 SSD2 HD4 HD6 HD7
To Next Page
Loading...
