Chapter 4 Servicing Motherboard Components 4-13
FIGURE 4-7 Installing the Memory Tray
2. Install the top cover.
See Section 6.1, “Installing the Top Cover” on page 6-2.
3. Slide the server into the rack.
See Section 6.3, “Returning the Server to the Normal Rack Position” on page 6-4.
4. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See Section 6.4, “Powering On the Server” on page 6-5.
5. Power on the server.
See Section 6.4, “Powering On the Server” on page 6-5.
To Next Page
Loading...
