Chapter 6 Returning the Server to Operation 6-5
3. Reconnect the cables to the back of the server.
If the CMA is in the way, disconnect the left CMA release and swing the CMA
open.
4. Reconnect the CMA.
Swing the CMA closed and latch it to the left rack rail.
FIGURE 6-3 Release Tabs on Rails
6.4 Powering On the Server
Before powering on your server for the first time, follow the installation and cabling
instructions provided in the Sun Fire X4450 Server Installation Guide, which might be
shipped with the system, and is also available online.
To connect power cords and apply power to the server:
To Next Page
Loading...
