72 • Questions? Call or Text +1-801-658-0015
SUNSTONE CDDP-A USERS GUIDE
CUSTOM FUNCTIONS
• Modbus E-Stop Set: Does not require any data.
• Modbus E-Stop Clear: Does not require any data.
• Weld: Does not require any data.
Byte 0 1 2 3 4 5 6 7
Name Total Energy (mWs) Pulse 1
Enabled
Pulse 2
Enabled
Pulse 1 Energy (mWs)
[3:2]
Type uint32 bool bool uint32
Byte 8 9 10 11 12 13 14 15
Name Pulse 1 Energy (mWs)
[1:0]
Pulse 2 Energy (mWs) Time
Between
Pulses
Pre Weld
Delay (ms)
[1]
Type uint32 uint32 uint8 uint16
Byte 16
Name Pre Weld
Delay (ms)
[0]
Type uint16
Byte 0 1 2 3 4 5 6 7
Name Enable
Weld
Head Use
Weld
Head
Control
Type
Squeeze Delay (ms) Hold Delay (ms)[3:2]
Type bool uint32 uint32
Byte 8 9 10 11 12
Name Hold Delay (ms)[1:0] Roll Spot
Enabled
Roll Spot in Between
Delay (ms
Type uint32 bool uint16
To Next Page
Loading...
