4-13 ELECTRICAL
Push down the pinion stopper 2, remove stopper ring 1.
Remove pinion stopper 2, spring 3, and pinion 4.
A
Wear safety grasses when disassembling
and assembling stopper ring.
NOTE:
Using a screw-driver, pry off the stopper ring.
Remove two bolts 5.
Remove following parts :
• Front cover 6
• Washer 7,8
• Stator 9
• Armature 0
• Washer A
• Rear cover B
Remove the nut C, washer D and E from rear cover B.
Remove two screws F and brush holder assembly G (with
brush H and brush spring I).
1
2
3
4
6
7
8
0
A
9
5
B
CD
E
F
H
G
I
B
To Next Page
