POWER TRIM AND TILT 8-18
OPERATION
The power trim and tilt system is operated by a “rocker” type switch (protected by a rubber thumb pad) on top
of the remote control box handle.
When the switch is depressed, power is delivered to the electric motor via the relevant relay. The relay with the
Blue wire connected to the PTT pump is for trim/ tilt “up”, while the relay with the Green wire is for trim/tilt
“down”.
COMPONENTS
Oil reservoir
Tilt rod
PTT cylinder
Piston
Free piston
Gear pump
Check valveB
PTT motor
Check valveA
“DOWN” relief
valve
Spool valve
“DOWN” pressure
main check valve
Manual release valve
“UP” relief valve
“UP” pressure main check valve
To Next Page
Loading...
