6-9 POWER UNIT
INTAKE MANIFOLD
Install intake manifold assembly.
(See page 6-2)
FINAL ASSEMBLY CHECK
Perform the following checks to ensure proper and safe opera-
tion of the repaired unit.
• All parts removed have been returned to their original posi-
tions .
• Lower unit gear engagement is properly adjusted.
(See page 9-22)
• Fuel and water hose routing match’s service manual illustra-
tion. (See page 10-7 to 10-9)
• Wire routing match’s service manual illustration.
(See page 10-2 to 10-6)
• No fuel leakage is evident when fuel system is pressurized.
(See page 5-3)
• No water leakage is evident during final test running.
To Next Page
Loading...
