Suzuki DF 40 - Page 282

10 DF40/S0 "KS" ('OS) MODEL
I
Item
I
Unit
I
CRANKSHAFT/CONROD
Conrad small end inside
I STD
mm (in)
I
diameter
•
Conrad big end oil clearance STD
mm (in)
Limit
mm (in)
Conrad big end inside
I
diameter
STO
mm (in)
Crank pin outside diameter
STO
mm (in)
Crank pin outside diameter
I
difference I Limit
mm (in)
(out
of round and taper)
i
'Conrod bearing thickness
STO mm (in)
Conrad big end side
STD
mm (in)
clearance
Limit mm (in)
Conrad big end width
STO mm (in)
Crank pin width
STO mm (in)
Crankshaft center journal
,
r: !fV}ut
Limit
mm (in)
Crankshaft journal
oil
. STO
mm (in)
dearance
Limit mm (in)
Crankcase bearing
holder
STO mm (in)
inside diameter
I
. Crankshaft journal outside
STO mm (in)
! diameter
Crankshaft journal outside
diameter difference Limit
mm (in)
I
(out of round and taper)
Crankshaft bearing
STD mm (in)
thickness
,~--
Crankshaft thrust play
STO mm (in)
!
Limit mm (in)
Crankshaft thrust bearing
i i
I
I STD I
mm (in)
thickness
•
LOWER UNIT
Design specification thickness for shim
& washer.
Pinion gear back-up shim
I
mm (in)
Forward gear back-up shim
mm (in)
I
•
Forward gear thrust washer
mm (in)
Reverse gear thrust washer
mm (in)
Reverse gear back-up shim mm (in)
I
Data
DF40T/40QH i DFSOT/SOTHISOWT/SOWQH
18.003 - 18.011 (0.7088 - 0.7091)
0.020
- 0.040 (0.0008 - 0.0016)
0.065 (0.0026)
41.000
- 41.018 (1.6142 - 1.6149)
37.982 -
38.000 (1.4954 - 1.4961)
0.010 (,0.0004)
'.
1.486 - 1.502 (Q.0585 - 0.0591)
0.100
- 0.250 (0.0039 - 0.0098)
0.350 (0.0138)
21.950
- 22.000 (0.8642 - 0.8661)
22.100
- 22.200 (0.8700 - 0.8740)
0.04 (0.002)
0.020
- 0.040 (0.0008 - 0.0016)
0.065 (0.0026)
49.000-49.018 (1.9291-1.9298)
44.982 - 45.000 (1.7709 - 1.7717)
0.010 (0.0004)
1.999 - 2.015 (0.0787 - 0.0793)
0.11 - 0.31 (0.004 - 0.012)
0.35 (0.014)
2.470
- 2.520 (0.0972 - 0.0992)
1.0 (0.04)
1.0 (0.04)
2.0 (0.08)
2.0 (0.08)
1.0 (0.04)
1,_
fit4