Suzuki DF 40 - Page 321

------------ ~~"'-
Fix lead wires not to contact with flywheel magneto.
Fix
engine wiring
harness not to contact
with
oil filler cap.
Fix
engine wiring harness
not to contact with hose clip_
--'-"~'----'--'''''--"-----
Rectifier &
Exhaust manifold temp.
-_~ _______ c_c_c_c_c ___ c _____ c ________ c __ c __ _
MAP sensor
-
Fix engine wiring harness
not to contact with clamp.
. sensor
MAP sensor bracket
Electric parts
holder cover
charge coil
Starter motor
CKP sensor
After installing flywheel magneto and
securing nut with specified torque,
check air gap between CKP sensor
and retuctor bars on flywheel maaneto.J
Air
gap: 0_75 mm (0.030 in)
C
"11
~