Suzuki DF 40 - Page 358

DF40/50 “K7” (’07) MODEL 11
ELECTRICAL
STARTER MOTOR
Item Unit
Data
DF40 DF50
Ignition timing Except E01
Degrees
ATDC 1° – BTDC 27° ATDC 1° – BTDC 24°
E01 ATDC 1° – BTDC 19° ATDC 1° – BTDC 23°
Over revolution limiter Except E01
r/min
6 500
6 700
E01 6 800
CKP sensor resistance
Ω
at 20 °C 168 – 252
CMP sensor resistance
Ω
at 20 °C —
Ignition coil resistance Primary
Ω
at 20 °C 1.9 – 2.5
Secondary k
Ω
at 20 °C 8.1 – 11.1
Battery charge coil resistance
Ω
at 20 °C 0.56 – 0.84
Battery charge coil output (12 V) Watt 216
Standard spark plug Type NGK DCPR6E
Gap mm (in) 0.8 – 0.9 (0.031 – 0.035)
Fuse amp. rating A Main fuse: 30
Recommended battery capacity
(12 V)
Ah (kC) 70 (252) or larger
Fuel injector resistance
Ω
at 20 °C 11.0 – 16.5
IAC valve resistance
Ω
at 20 °C 21.5 – 32.3
IAT sensor/Cylinder temp. sensor/
Ex-mani. temp. sensor
(Thermistor characteristic)
k
Ω
at 25 °C 1.8 – 2.3
ECM main relay resistance
Ω
at 20 °C 145 – 190
Starter motor relay resistance
Ω
at 20 °C 145 – 190
PTT motor relay resistance
Ω
at 20 °C 25 – 37
Max. continuous time of use Sec. 30
Motor output kW 1.4
Brush length STD mm (in) 15.5 (0.61)
Limit mm (in) 9.5 (0.37)
Commutator undercut STD mm (in) 0.5 – 0.8 (0.02 – 0.03)
Limit mm (in) 0.2 (0.01)
Commutator outside
diameter
STD mm (in) 29.0 (1.14)
Limit mm (in) 28.0 (1.10)
Commutator outside
diameter difference
STD mm (in) 0.05 (0.002)
Limit mm (in) 0.40 (0.016)
Pinion to ring gear gap STD mm (in) 3.0 – 5.0 (0.12 – 0.20)