Suzuki DF 90 - CYLINDER; CRANKSHAFT; PISTON

6-40 POWER UNIT
1. Remove driven gear.
2. Remove oil filter.
\ 09915-47332 : Oil filter wrench
3. Remove oil pressure switch.
CYLINDER / CRANKSHAFT / PISTON
DISASSEMBLY
Before performing service work in this section :
• Remove power unit (See page 6-5 to 6-8)
• Remove timing chain (See page 6-14 to 6-15)
• Remove cylinder head (See page 6-20)
4. Remove ten (10) bolts
1.
Remove ten (10) bolts
2.
NOTE:
Removal (loosening order) is reverse of installation (tightening
order). See page 6-62.
5. Remove crankcase from cylinder block.