DF90/115/140 “K5” (’05) MODEL
15-25
ENGIN HOLDER
The exhaust plug has been changed in length.
The circlip retaining the clutch shaft bearing has been added.
UPPER AND LOWER MOUNT
The upper mount washer has been changed in inside diameter from 12.0 mm to 12.5 mm.
The lower mount washer has been changed in thickness from 2.5 mm to 3.0 mm.
The lower mount bolt has been changed in shape.
8 mm 15 mm
Circlip added
Exhaust plug
Upper mount Lower mount
Washer
(I.D.: 12.0 mm 12.5 mm)
Washer
(Thickness: 2.5 mm 3.0 mm)
17 mm 19 mm
Bolt
To Next Page
Loading...
