7-18 MID UNIT
Seal lip
STEERING BRACKET
1. Apply Water Resistant Grease to steering bracket shaft.
N 99000-25161 : Suzuki Water Resistant Grease
NOTE:
Apply grease to bushings, oil seal lip and pilot shaft portion of
steering bracket.
2. Install upper bushing 1, and washer 2 to swivel bracket.
3. Install lower bushing 3 and swivel bracket seal 4 to swivel
bracket.
NOTE:
Install seal
4
with lip (spring side) facing downward.
4. Install steering bracket 5 to swivel bracket.
LOWER MOUNT BRACKET
1. Install washer 6 and shim 7, and then slide lower mount
bracket 8 upward on splines until it contacts shim.
2. Install circlip 9 to retain bracket.
Do not re-use seal once removed. Always use a new seal.
To Next Page
