COOLING SYSTEM 10-7
• Install the dowel pins
1 and new gasket
2.
.
• Tighten the crankcase cover bolts to the specified torque.
& Crankcase cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
INSPECTION AFTER REASSEMBLY
After reinstalling the water pump, inspect the followings.
• Transmission oil level ("2-9)
• Engine coolant level ("2-11)
CAUTION
Use a new gasket to prevent engine coolant leakage.
To Next Page
Loading...
