Suzuki RM 250 2003 - Handlebar Controls; Removal

CONSTRUCTIONS 12-3
HANDLEBAR CONTROLS
REMOVAL
• Remove the clutch lever.
• Remove the engine stop switch
1.
• Remove the clamps.
• Remove the throttle assembly
2.
• Remove the front brake master cylinder
3.
25 N·m
(2.5 kgf-m, 18.0 lb-ft)
6 N·m
(0.6 kgf-m, 4.5 lb-ft)
6 N·m
(0.6 kgf-m, 4.5 lb-ft)
Adhesive agent
Adhesive agent