REAR SUSPENSION 16-19
• Inspect the bearings, spacers and dust seals for damage.
• Insert the spacers into the bearings and inspect them for
excessive play and smooth movement.
BEARING REPLACEMENT
• Remove the bearings with the special tool.
# 09921-20240: Bearing remover set
• Apply SUZUKI SUPER GREASE to the bearings.
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Press the new bearings with the special tools.
# 09924-84521: Bearing installer set
09941-34513: Steering race installer set
REASSEMBLY
Reassemble and remount the swingarm in the reverse order of
removal and disassembly. Pay attention to the following points:
• Apply grease to the spacers, dust seals and bearings.
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Tighten the swingarm pivot shaft nut to the specified torque.
% Swingarm pivot nut: 70 N·m (7.0 kgf-m, 50.5 lb-ft)
To Next Page
Loading...
