GENERAL INFORMATION 1-9
OPERATING INSTRUCTIONS
STARTING THE ENGINE
Inspect the transmission oil level, coolant level and air cleaner
condition before starting the engine.
When the engine is cold:
1) Turn the fuel valve lever to the “ON” position.
2) Shift the transmission into neutral.
3) Pull the bypass (starter) knob
1.
4) Close the throttle grip completely and depress the kick
starter lever forcefully.
5) Return the bypass (starter) knob when the engine revs at
steady speed.
When the engine is warm:
1) Turn the fuel valve lever to the “ON” position.
2) Shift the transmission into neutral.
3) Open the throttle 1/8 – 1/4 turn
A and depress the kick
starter lever forcefully.
To restart after the motorcycle has fallen:
1) Shift the transmission into neutral.
2) Open the throttle completely and depress the kick starter
lever forcefully.
3) Close the throttle gradually as engine speed increases.
4) Wait until engine revs smoothly.
CAUTION
Racing the engine in neutral will exceed the engine
speed limit. Exceeding the engine speed limit can
damage the engine moving parts.
Do not race the engine at high speed to avoid the
engine damage.
To Next Page
Loading...
