9-10 FUEL SYSTEM
CARBURETOR
REMOVAL AND DISASSEMBLY
• Remove the seat and fuel tank. (!3-2)
• Disconnect the throttle position sensor and solenoid couplers.
• Loosen the carburetor clamp screws and remove the carbure-
tor
1.
• Remove the carburetor top cap
2 and throttle valve.
• Holding the spring
3, remove the throttle cable
4 from the
throttle valve.
• Remove the cable holder and jet needle.
CAUTION
Do not bend the throttle cable and do not damage the
throttle position sensor.
To Next Page
Loading...
