Suzuki RM 250 2003 - Page 94

FUEL SYSTEM 9-11
• Carburetor top cap
5
• Throttle valve spring
6
• Throttle valve collar
7
• Cable holder
8
• Jet needle
9
• Throttle valve
0
• Remove the screws and carburetor float chamber
A.
• Remove the float pin
B and floats C.
• Remove the needle valve ass’y
D.
• Remove the main jet
E and slow jet F.
• Remove the power jet
G.
• Remove the throttle stop screw
H.
• Remove the starter knob
I.
• Remove the air screw
J.
• Remove the solenoid
K.