TRANSMISSION AND CRANKSHAFT 8-9
CRANK CASE
OIL SEAL INSPECTION AND REMOVAL
• Inspect the oil seal lips for wear and damage.
• Remove the oil seal with the special tool.
" 09913-50121: Oil seal remover
OIL SEAL INSTALLATION
• Fit a new oil seal with the special tool.
• Apply grease to the oil seal lip.
" 09913-70210: Bearing installer set
NOTE:
Be sure to check the direction of the crank shaft bearing oil seals
before fitting them.
Left seal
Outside Outside
Right seal
To Next Page
Loading...
