PERIODIC MAINTENANCE 2-13
CLUTCH
Adjust the clutch cable play as follows:
MAJOR ADJUSTMENT
• Loosen the locknut
1.
• Turn the adjuster
2 so that the clutch lever obtains 10 – 15
mm (0.4 – 0.6 in) play at the clutch lever end.
• Tighten the locknut
1.
MINOR ADJUSTMENT
• Turn the quick adjuster
3 so that the clutch lever obtains 10 –
15 mm (0.4 – 0.6 in) play at the clutch lever end before pres-
sure is felt.
" Clutch lever play: 10 – 15 mm (0.4 – 0.6 in)
THROTTLE CABLE
Adjust the throttle cable play as follows:
• Loosen the locknut
1.
• Turn the adjuster
2 so that the throttle grip obtains 2 – 4 mm
(0.08 – 0.16 in) play.
" Throttle cable play: 2 – 4 mm (0.08 – 0.16 in)
• Tighten the locknut
1.
10 – 15 mm
(0.4 – 0.6 in)
10 – 15 mm
(0.4 – 0.6 in)
% WARNING
Inadequate throttle cable play can cause engine speed
to rise suddenly when you turn the handlebars. This
can lead to loss of rider control.
Adjust the throttle cable play so that engine speed
does not rise due to handlebar movement.
2 – 4 mm
(0.08 – 0.16 in)
2 – 4 mm
(0.08 – 0.16 in)
To Next Page
Loading...
