Suzuki RM 250 2003 - Primary Driven Gear; Clutch Release Camshaft

5-4 CLUTCH
PRIMARY DRIVEN GEAR
• Remove the clutch cover. ( !5-3)
• Remove the clutch plates. (!5-3)
• Flatten the lock washer
1.
• Hold the clutch sleeve hub
2 with the special tool and
remove the nut
3.
" 09920-53740: Clutch sleeve hub holder
• Remove the clutch sleeve hub.
• Remove the washer
4 and primary driven gear assembly 5.
• Remove the bearing
6 and spacer 7.
CLUTCH RELEASE CAMSHAFT
• Remove the magneto rotor and stator. (!7-3)
• Loosen the clutch cable adjuster and unhook the cable.
• Remove the clutch release ft
1.