3-4 ENGINE DISMOUNTING AND MOUNTING
• Remove the magneto cover. (!7-3)
• Disconnect the clutch cable.
NOTE:
Loosen the clutch cable adjuster when disconnecting.
(!2-13)
• Remove the engine mounting bolts and brackets.
• Remove the swingarm pivot shaft nut
5 and washer.
• Extract three quarters of the swingarm pivot shaft so as to
keep the swingarm in position.
NOTE:
The swingarm will come off when the swingarm pivot shaft is
completely removed.
• Dismount the engine to the right side.
To Next Page
Loading...
