Suzuki Vinson LT-A500F - Page 110

3-70 ENGINE
• Hold the movable drive face and movable driven face using
the special tool and tighten them to the specified torque.
ITSSLI 09930-40113: Rotor holder
H Movable drive face nut: 115 N-m (11.5 kgf-m, 83.0 Ib-ft)
Movable driven face nut: 115 N-m (11.5 kgf-m, 83.0 Ib-ft)
• Turn the fixed drive face, until the drive bolt is properly
seated and both the drive and driven faces rotate together
smoothly and without slipping.