Suzuki Vinson LT-A500F - Engine Removal and Remounting

ENGINE 3-3
ENGINE REMOVAL AND REMOUNTING
ENGINE REMOVAL
Before taking the engine out of the frame, wash the engine
using a steam cleaner. Engine removal is sequentially
explained in the following steps.
• Shift the range lever to the "Neutral" position.
• Remove the front fender and rear fender. (CZT
3
7-6 and 7-7)
• Drain the engine oil. 2-8)
• Remove the carburetor. (CT
3
5-8)
• Remove the muffler.
• Remove the center exhaust pipe cover © and exhaust
pipe ©.
• Remove the cooling duct connector and cooling ducts.
Cooling duct No.1 ®
Cooling duct No.2 @
Cooling duct No.3 ©