SHAFT DRIVE AND DIFFERENTIAL 4-13
•
Remove the differential gear case mounting stay.
DISASSEMBLY
DIFFERENTIAL DRIVE GEAR
HOUSING
•
Remove the C-rings.
•
Remove
the
bearing
by
hitting
the
copper hammer
on the
position
© of
the front propeller shaft joint yoke.
•
Separate
the
front propeller shaft joint yoke
and
differential
drive
bevel gear yoke.
•
Remove
the
bearing from
the
differential drive bevel gear
yoke
by the
same manner
as the
front propeller shaft joint
yoke.
NOTE:
When
removing
the
bearing,
take
care not to
drop
the needle
rollers
from
the cage.
•
Remove the differential drive bevel gear housing.
To Next Page
Loading...
