RUBBER
PARTS
Replace the removed rubber parts
©
with
new ones.
BRAKE
CALIPER
REASSEMBLY
AND
REMOUNTING
Reassemble
and remount the brake caliper in the reverse order
of removal
and
disassembly.
Pay
attention
to the
following
points:
•
Wash
the caliper bores and pistons
with
the specified brake
fluid.
Thoroughly wash the dust seal grooves and piston seal
grooves.
|H Specification and classification: DOT 4
A CAUTION
* Wash the brake caliper components
with
new brake
fluid
before
reassembly.
* Do not wipe the brake
fluid
off
after
washing the
components.
*
When
washing the components, use the specified
brake fluid. Never use
different
types of
fluid
or
cleaning solvents
such
as gasoline, kerosine, etc.
* Replace the removed piston
seals
and dust
seals
with
new ones.
* Apply brake
fluid
to all of the
seals,
brake caliper
bores and pistons
before
reassembly.
PISTON
SEALS
•
Install
the piston seals
©
and dust seals
© as
shown.
BRAKE
CALIPER
HOLDER
•
Apply
SUZUKI
SILICON
GREASE
to the
brake caliper
holder.
99000-25100:
SUZUKI SILICONE
GREASE
To Next Page
Loading...
