Suzuki Vinson LT-A500F - Rear Axle Housing; Rear Axle Shaft Inspection; Rear Axle Shaft Removal and Disassembly

7-54 CHASSIS
REMOVAL AND DISASSEMBLY
• Remove the rear brake. (Cr
5
7-44 to 7-46)
• Remove the rear suspension (d7
=>
7-51)
• Remove the left side wheel hub using the special tools.
09924-21940: Wheel hub remover
09930-30102: Sliding hammer
• Remove the final bevel gear case cover.
• Support the final bevel gear case with a stand or wooden
blocks.
• Remove the rear axle housings © and trailer towing <
Remove the rear axle shafts.
INSPECTION
REAR AXLE HOUSING
Inspect the rear axle housing for distortion or damages. If any
damages are found, replace the rear axle housings with new
ones.