CHASSIS
7-17
FRONT
BRAKE
CONSTRUCTION
©
Master cylinder reservoir cap
©
Diaphragm
©
Master cylinder clamp
©
Boot
©
Piston/cup set
© Cup
©
Spring
©
Master cylinder
©
Brake hose No.1
®
Brake hose No.2
®
Brake hose No.3
®
Brake pipe
joint
®
Brake pipe,
RH
@
Brake pipe,
LH
©
Piston
©
Piston seal
®
Dust
seal
©
Brake caliper
©
Brake caliper holder
©
Brake pad
®
Pad Spring
®
Master cylinder clamp bolt
®
Brake hose union bolt
©
Brake pipe nut
®
Air bleeder valve
©
Brake caliper mounting bolt
©
Brake pad mounting pin
ITEM
Nm
kgf-m
Ib-ft
®
10 1.0 7.0
(D
23 2.3 16.5
©
16 1.6 11.5
®
7.5 0.75 5.0
©
26 2.6 19.0
©
18 1.8 13.0
A
WARNING
* This brake system is filled
with
an ethylene glycol-based DOT 4 brake fluid. Do not use or
mix different types of fluid,
such
as
silicone-based
or petroleum-based brake fluids.
* Do not use any brake fluid taken
from
old, used or unsealed containers. Never reuse brake
fluid
left
over
from
the last servicing or which has been stored for long periods of time.
* When storing brake fluid,
seal
the container completely and keep it away
from
children.
* When replenishing brake fluid, take care not to get dust into the fluid.
* When washing brake components, use new brake fluid. Never use cleaning solvent.
* A contaminated brake
disc
or brake pad reduces braking performance. Discard contami-
nated pads and clean the
disc
with
high quality brake cleaner or a neutral detergent.
A CAUTION
Handle brake fluid
with
care: the fluid reacts chemically
with
paint,
plastics,
rubber materials
etc.
To Next Page
Loading...
