Suzuki Vinson LT-A500F - Front and Rear Wheels Construction

CHASSIS 7-9
FRONT AND REAR WHEELS
CONSTRUCTION
REMOVAL
• Place the vehicle on level ground.
• Remove the wheel set nuts.
• Support the vehicle with a jack or wooden block and remove
the front and rear wheels.
REMOUNTING
Remount the wheels in the reverse order of removal. Pay atten-
tion to the following point:
• Tighten the wheel set nuts to the specified torque.
[J] Front and rear wheel set nut:
50 N m (5.0 kgf-m, 36.0 Ib-ft)
Rear wheel