PERIODIC
MAINTENANCE 2-19
STEERING
Inspect
initially at 200 km (100 miles, 1 month) and
every
1
000 km (600 miles, 3 months) thereafter.
Steering system should be adjusted properly for smooth manip-
ulation
of the handlebars and safe running.
TOE-IN
•
Place the vehicle on level ground.
•
Make sure the
tire
pressure for both tires is the same and set
to
the proper
specification.
•
Set the front wheels in the forward position.
•
Place
a
load
of
75 kg (165 lbs) on the seat.
•
Measure the distance
®
and
(§) of
the front wheels
with
a
toe-in
gauge
as
shown
and
calculate
the
difference
between
®
and (§).
MToe-in: 7-15 mm
(0.28-0.59
in)
• If
the toe-in
is
out
of
specification, bring
it
into the specified
range.
(CZT
7-42)
SUSPENSIONS
Inspect
every 2 000 km (1 200 miles, 6 months).
Support the machine using
a
jack and wooden blocks.
Remove
the front and rear wheels.
{CZT 7-9)
Inspect
the suspension arm and bushing for scratches, wear,
or
damage.
If
any damages are found, replace the suspen-
sion arm or bushing
with
a
new one.
(CT
3
7-29 and 7-51)
To Next Page
Loading...
