Suzuki Vinson LT-A500F - Removal

4-12 SHAFT DRIVE AND DIFFERENTIAL
REMOVAL
• Drain the differential gear oil. {{^T 2-10)
• Remove the front suspension. (CI7
3
7-29)
• Remove the differential gear case covers.
• Remove the front drive shaft using the special tools.
(^L] 09930-30102: Sliding hammer
09924-21940: Wheel hub remover
09924-21930: Drive shaft remover
• Remove the front propeller shaft joint bolt.
Disconnect the selection lever cable and breather hose.
Remove the differential gear case mounting bolt.