Suzuki Vinson LT-A500F - Steering Inspection; Steering Shaft and Holder

INSPECTION
Inspect the removed parts for the following abnormalities.
* Handlebar distortion
* Handlebar clamp wear
DUST SEALS
Inspect the dust seals for wear or damage. If any damages are
found, replace the dust seals with new ones.
TIE ROD
Inspect the tie rod for distortion or damage. If any damages are
found, replace the tie rod with a new one.
TIE ROD END
Inspect the tie rod end and boots for smooth movement. If there
are any abnormalities, replace the tie rod end with a new one.
STEERING SHAFT AND HOLDER
Inspect the steering shaft for distortion or bends. If any dam-
ages are found, replace the steering shaft with a new one.
Inspect the two steering shaft holders for wear or damage. If
any damages are found, replace the steering shaft holders with
new ones.