Suzuki Vinson LT-A500F - Page 227

7-38 CHASSIS
• Separate the tie rod ends ®, nuts © and
rods 0.
), and tie
A CAUTION
The locknuts (2) have left-hand threads.
• Remove the cotter pin and steering shaft nut.
A CAUTION
Replace the removed cotter pins with new ones.
• Remove the clips and steering shaft holder bolts.
• Remove the steering shaft.
A CAUTION
Replace the removed clips with new ones.
Remove the dust seals from the steering shaft.
Remove the dust seal and O-ring from the frame.
A CAUTION
Replace the removed O-ring with a new one.