Suzuki Vinson LT-A500F - Page 216

When remounting the master cylinder on the handlebar, align
the master cylinder holder's mating surface © with the punch
mark © on the handlebar and tighten the upper clamp bolt first.
H Master cylinder clamp bolt: 10 N m (1.0 kgf-m, 7.0 Ib-ft)
® Master cylinder
(§) Master cylinder upper clamp bolt
© Handlebar
® Clearance
• Tighten the brake hose union bolt to the specified torqe.
H Brake hose union bolt: 23 N m (2.3 kgf-m, 16.5 Ib-ft)
A CAUTION^
Bleed air from the brake system after reassembling
the master cylinder, (c^T
3
2-16 and 2-17)