Suzuki Vinson LT-A500F - Page 223

7-34 CHASSIS
• Install the steering knuckle dust seal using the special tool.
(^L) 09913-70210: Bearing installer set
• Apply THREAD LOCK SUPER "1303" or "1322" to the steer-
ing knuckle end bolt, and then tighten it to the specified torque.
For USA
ti3 99000-32030: THREAD LOCK SUPER "1303"
For the other countries
99000-32110: THREAD LOCK SUPER "1322"
[*] Steering knuckle end bolt:
145 N m (14.5 kgf-m, 105.0 Ib-ft)
• Apply THREAD LOCK SUPER "1303" or "1322" to the steer-
ing knuckle pinch bolts, and then tighten it to the specified
torque.
For USA
463 99000-32030: THREAD LOCK SUPER "1303"
For the other countries
rfsB 99000-32110: THREAD LOCK SUPER "1322"
[5 Steering knuckle pinch bolt: 50 N m (5.0 kgf-m, 36.0 Ib-ft)
• Apply THREAD LOCK SUPER "1303" or "1322" to the wish-
bone arm pivot bolts, and then tighten the nuts 0 to the
specified torque.
For USA
tS 99000-32030: THREAD LOCK SUPER "1303"
For the other countries
4s§ 99000-32110: THREAD LOCK SUPER "1322"
[*] Wishbone arm pivot nut: 65 N-m (6.5 kgf-m, 47.0 Ib-ft)
• Tighten shock absorber mounting nuts (D to the specified
torque.
H Shock absorber mounting nut:
60 N m (6.0 kgf-m, 43.5 Ib-ft)