Suzuki Vinson LT-A500F - Page 324

LT-A500FK1 ('01-MODEL) 10-5
CAMSHAFT + CYLINDER HEAD Unit: mm (in)
ITEM
STANDARD LIMIT
Cam height
IN.
33.450 - 33.490
(1.3169 - 1.3185)
33.150
(1.3051)
EX.
33.520 - 33.560
(1.3197- 1.3213)
33.220
(1.3079)
Camshaft journal oil clearance
<p22
0.032 - 0.066
(0.0013-0.0026)
0.150
(0.0059)
(j) 17.5
0.028 - 0.059
(0.0011 - 0.0023)
0.150
(0.0059)
Camshaft journal holder I.D.
</>22
22.012-22.025
(0.8666-0.8671)
<f> 17.5
17.512 - 17.525
(0.6894 - 0.6900)
Camshaft journal O.D.
022
21.959-21.980
(0.8645 - 0.8654)
0 17.5
17.466- 17.484
(0.6876 - 0.6883)
Camshaft runout
0.10
(0.004)
Rocker arm I.D.
IN. & EX.
12.000- 12.018
(0.4724-0.4731)
Rocker arm shaft O.D.
IN. & EX.
11.973 - 11.984
(0.4714-0.4718)
Cylinder head distortion
0.05
(0.002)
Cylinder head cover distortion
0.05
(0.002)
CYLINDER + PISTON + PISTON RING
Unit: mm (in)
ITEM
STANDARD
LIMIT
Compression pressure
(Automatic-decomp. actuated)
800 kPa
Approx. / 8.0 kgf/cm
2
\
\ 114 psi /
Piston to cylinder clearance
0.030 - 0.040
(0.0012 - 0.0016)
Cylinder bore
87.500-87.515
(3.4449 _ 3.4455)
Nicks or
Scratches
Piston diam.
87.465 - 87.480
(3.4435-3.4441)
Measure at 15 mm (0.6 in) from the skirt end.
87.380
(3.4402)
Cylinder distortion
0.05
(0.002)
Piston ring free end gap
1st R
11.3
Approx.
(0 44)
9.0
(0.35)
2nd
R
9
-
7
Approx.
(0 38)
7.8
(0.31)
Piston ring end gap
1st
0.20 - 0.35
(0.008-0.014)
0.70
(0.028)
2nd
0.35 - 0.50
(0.014-0.020)
0.70
(0.028)
Piston ring to groove clearance
1st
0.180
(0.0071)
2nd
0.150
(0.0059)