Suzuki Vinson LT-A500F - Page 335

10-16 LT-A500FK1 f 01-MODEL)
• Hold the final drive shaft coupling using the special tool and
then remove the final drive gear nut.
IT55LI 09924-61810: Final drive gear coupling holder.
Remove the washer © and final drive shaft coupling
® ®
Remove the bearing stopper pin.
ft
Remove the final drive gear bearing stopper using the special
tool.
^ 09921-21820: Final gear stopper remover
A CAUTION
Replace the removed oil seal and O-ring with a new one.
• Remove the final drive gear (3) and shim @.
r
(D