10-18
LT-A500FK1
('01-MODEL)
BEARINGS
AND OIL
SEALS
INSPECTION
Check the inner race play of the bearing by hand while it is in the
case.
Rotate the inner race by hand to inspect for abnormal noise and
smooth
rotation.
If
anything unusual
is
found, replace the bear-
ing
with
a
new one.
NOTE:
Make
sure
to
check
each
bearing in the
same
manner.
1
-—Play
Play
i
n
CCD
t
Inspect
the oil seal for wear
or
damages.
If any
damages
are
found, replace the oil seal
with
a
new one.
FINAL
GEAR
CASE
BEARINGS
AND OIL
SEAL
•
Remove
the final driven gear oil seal using the special
tool.
Irogll 09913-50121: Oil
seal
remover
A
CAUTION
Replace
the removed oil
seal
with
a new one.
•
Remove
the final driven gear bearing using the special
tool.
IT55LI
09913-70210: Bearing installer set
Remove
the final drive
pilot
bearing using the special tools.
|LJ
09923-74510: Bearing remover
09930-30102: Sliding hammer
A
CAUTION
Replace
the removed bearing
with
a new one.
To Next Page
Loading...
