Suzuki Vinson LT-A500F - Page 54

3-14 ENGINE
• Remove the cam chain guide ©.
• Remove the cylinder base nuts ©, and then remove the cyl-
inder.
If the cylinder does not come off, lightly tap it using a plastic
mallet.
Remove the cylinder gasket (3) and dowel pins @.
• Place a clean rag over the cylinder base to prevent the pis-
ton pin circlip from dropping into the crankcase.
• Remove the piston pin circlip.
• Draw out the piston pin and remove the piston.
• Remove the speedometer gearbox.
• Remove the starter cup.