3-42 ENGINE
REASSEMBLY
Reassemble the movable
and
fixed drive face
in the
reverse
order of disassembly. Pay attention to the following points:
•
Apply
a
small amount
of
SUZUKI
SUPER
GREASE
"A" to
the
bore and oil seal lip.
For
USA
JSj*
99000-25030:
SUZUKI
SUPER
GREASE
"A"
For
the other countries
99000-25010:
SUZUKI
SUPER
GREASE
"A"
A CAUTION
*
Wipe
off any
excess
grease thoroughly.
* Take care not to apply grease to the contact surface
of the drive belt.
•
Position the eight rollers
©
on the movable drive face.
•
Mount the damper
©
on the movable drive face plate
©.
•
Position the movable drive plate on the movable drive face.
•
Install
the spacer.
NOTE:
Press
down the movable drive face plate so as not to
cause
the
rollers
to come out of position when inserting the spacer.
To Next Page
Loading...
