AIR BAG SYSTEM 10B-47
DIAGNOSTIC FLOW TABLE
Step Action Yes No
1 1) This DTC is set when there is a trouble in
“AIR BAG” warning lamp circuit. Check “AIR
BAG” warning lamp circuit referring to AIR
BAG DIAGNOSTIC SYSTEM CHECK in
this section.
Is “AIR BAG” warning lamp circuit in good con-
dition?
Go to step 2. Repair “AIR BAG” warn-
ing lamp circuit.
2 1) Clear DTC (Refer to DTC CLEARANCE in
this section.)
2) Check DTC (Refer to DTC CHECK in this
section.)
Is DTC B1061 set?
Substitute a known-good
SDM and recheck.
Recheck air bag system.
Refer to AIR BAG DIAG-
NOSTIC SYSTEM
CHECK in this section.
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to DTC CLEARANCE), if any.
• Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK to confirm that the trouble has been corrected.
To Next Page
Loading...
